Brother 4000CN User Manual page 32

Continued from the previous page.
↓
TCP/IP
Setup IP Address
↓
Setup IP Address
DHCP *
↓
Setup IP Address
Panel *
↓
Reboot system
To take effect
↓
Setup IP Address
Panel *
↓
6. Press the <Form Feed/Set> or <
The value currently set has a '*' displayed next to it.
7. Press the < > button once.
8. Press the <Form Feed/Set> button once.
3 seconds later, the following screen appears.
When the value is set, a '*' appears next to it.
9. Press the <Job Cancel/Back> or <
The lower line of the screen returns to the 'Setup IP
Address'.
Look
Only restart the printer after setting the gateway
1
address at the last step. Continue to the next step
without restarting the printer.
1-5
> button once.
> button once.