Protocol - Brother 4000CN User Manual

Protocol

Set 'Enabled' or 'Disabled' for each item activate or deactivate them.
•
LPD (default: Enabled)
When using TCP/IP , set LDP to 'Enabled' to print with LPD (LPR) or to 'Disabled'
if you do not want to use this feature.
•
Port 9100 (default: Enabled)
When using TCP/IP , set Port 9100 to 'Enabled' to print with port 9100 (Raw Data
Socket) or to 'Disabled' if you do not want to use this feature.
•
IPP (default: Enabled)
When using TCP/IP , set IPP to 'Enabled' to print with IPP (Internet Printing
Protocol) or to 'Disabled' if you do not want to use this feature. Available with
Windows 2000/XP and Windows Me.
•
NetBIOS TCP/IP (default: Enabled)
When using NetBIOS (Windows network) with TCP/IP as the transport protocol,
set NetBIOS TCP/IP to 'Enabled' to print using NetBIOS or to 'Disabled' if you do
not want to use this feature.
•
NetBEUI (default: Enabled)
When using NetBIOS (Windows network) with NetBEUI as the transport
protocol, set NetBIOS NetBEUI to 'Enabled' to print using NetBIOS or to
'Disabled' if you do not want to use this feature.
•
NetWare (default: Enabled)
NetWare to 'Enabled' to print in a NetWare system or to 'Disabled' if you do not
want to use this feature.
•
AppleTalk (default: Enabled)
Set AppleTalk to 'Enabled' to print in an AppleTalk system or to 'Disabled' if you
do not want to use this feature.
5-15