Table of Contents
Advertisement
4. Insert the other end of exhaust and intake hose assembly with the hose connector to the window kit onto the window
panel kit and turn counterclockwise to secure.
5. Plug the power cord into the wall outlet and press the "Reset" button.
6. Please allow 20" of space around the unit for proper air circulation.
7. When removing the portable air conditioner for storage, the window panel may be left in place. Simply place
the included cover to cover the hole on the window panel.
Cleaning the Air Filter
Unit Cleaning
• Always switch off the air conditioner and disconnect the plug from the power supply outlet before cleaning the air conditioner.
• Use a soft damp cloth to wipe the body of the unit.
•
Never use harsh chemicals, oil-based products, detergents, chemically treated cloths or other cleaning solutions. These could
possibly damage the body of the air conditioner.
Page 14
This unit includes three air filters: a washable pre-filter, an activated
carbon filter and HEPA filter.
To ensure the air intake is filtered properly and to assure that your
air conditioner runs efficiently, it is recommended that the pre-filter
is washed at least once every two weeks depending on use.
1. Switch off the air conditioner.
2. Pull the pre-filter frame from the unit.
3. Remove the activated carbon filter from the pre-filter.
4. Use a vacuum cleaner or tap lightly to remove loose dust and
dirt from the pre-filter.
5. Rinse the pre-filter thoroughly under warm running water (no
hotter than 100° F.)
6. Dry thoroughly before re-inserting the filters.
NOTE: The activated carbon filter and HEPA filters are not
washable. They are optional filters and should be replaced
every 2-3 months or as needed if used.
• Please contact support@whynter.com for retail sales information or
visit whynter.com for a list of optional accessories
Advertisement
Table of Contents
