Table of Contents
Advertisement
Preparation
NOTE:
All illustrations in the manual are for explanation purpose only. Your machine may be slightly different. The actual shape shall
prevail. The unit can be controlled by the unit control panel alone or with the remote controller.
3
Design Notice
In order to ensure the optimal performance of our products, the design specifications of the unit and remote control are subject
to change without prior notice.
Exhaust Hose Installation
The exhaust hose and adapter must be installed or removed in accordance with the usage mode. For COOL mode, the exhaust
hose must be installed. For FAN or DRY mode, the exhaust hose can optionally be removed.
Choosing The Right Location
Energy Rating Information
We recommend that operating the unit at a room temperature below 95°F with the exhaust hose extended to the shortest
length possible and ensuring the exhaust hose diameter is not blocked or covered. Extending the exhaust hose greater than 9'
or blocking the exhaust hose diameter or any of the vents on the unit will reduce its efficiency.
Ambient Temperature Range For Unit Operation
MODE
Temperature Range
Cool
62-95°F (17-35°C)
Dry
55-95°F (13-35°C)
Page 7
8
4
7
12
11
5
Your installation location should meet the following requirements:
• Make sure that you install your unit on an even surface to
minimize noise and vibration.
• The unit must be installed near a grounded plug, and the
Lower Drain Port (found on the back of the unit) must be
accessible.
•
The unit should be located at least 20" from the nearest wall
to ensure proper air conditioning. The horizontal louver
blade should be at least 20" away from obstacles.
•
DO NOT cover any vent or the remote signal receptor of the
unit, as this could cause damage to the unit.
1. Control Panel
2. Air Outlet
3. Temperature Display
6
4. Handle (both sides)
5. Wheel Casters
6. Air Filter
9
7. Air Intake
8. Evaporator
10
9. Air Exhaust
10. Power Plug Socket
11. Lower Manual Drain Port
12. Power Supply Cord
Advertisement
Table of Contents
