Using The Brother Automatic Installer Application On The Cd-Rom To Configure Your Wireless Network Printer; Using The Setup Wizard From The Control Panel - Brother HL-4050CDN Network User's Manual

Using the Brother automatic installer application on the CD-ROM to configure
your wireless network printer
We recommend that you use the Brother automatic installer application on the CD-ROM we have provided
with the printer. For installation, see Wireless configuration for Windows
installer application on page 37 or Wireless configuration for Macintosh
application on page 67.

Using the Setup Wizard from the control panel

You can configure your print server by using the Setup Wizard function. This is located in the LAN menu on
the printer's control panel. See the steps below for further information:
a
Press any of the Menu buttons (+, -, OK or Back) on the control panel of your printer to take the printer
off-line.
Ready
h
Select ab or OK
Machine Info.
b
Press the + or - button to select LAN.
Select ab or OK
LAN
c
Press OK to move to the next menu level.
LAN
Wired
d
Press the + or - button to select WLAN.
LAN
WLAN
e
Press OK to move to the next level.
WLAN
TCP/IP
f
Press the + or - button to select Setup WLAN.
WLAN
Setup WLAN
g
Press OK to move to select the next level.
Setup WLAN
Setup Wizard
h
Press the + or - button to select Setup Wizard, then press OK.
Setup WLAN
Setup Wizard
Configuring your printer for a wireless network (For HL-4070CDW)
®
using the Brother automatic
®
using the Brother automatic installer
3
3
3
28