Brother HL-4050CDN Network User's Manual page 58
Multi-protocol on-board ethernet print server and wireless (ieee 802.11b/g) ethernet print server
Hide thumbs
Also See for HL-4050CDN:
- User manual (211 pages) ,
- Technical reference manual (517 pages) ,
- Service manual (341 pages)
Table of Contents
Advertisement
• If your access point is set to not broadcast the SSID you can manually add it by clicking the Add button.
Follow the on-screen instructions for entering the Name (SSID) and the Channel number.
p
If your network is not configured for Authentication and Encryption, the following screen will appear. To
continue configuration, click OK and go to r.
q
If your network is configured for Authentication and Encryption, the following screen will appear. When
configuring your Brother wireless printer, you must ensure that it is configured to match the
Authentication and Encryption settings of your existing wireless network. Choose the
Authentication Method and Encryption Mode from the pull-downs in each setting box. Then enter the
Network key and click Next.
Wireless configuration for Windows
®
using the Brother automatic installer application
4
51
Advertisement
Table of Contents
Troubleshooting
