Brother HL-4050CDN Network User's Manual page 97

r
To communicate with the configured wireless device, you must configure your computer to use same
wireless settings. Manually change the wireless settings on your computer to match the printer's wireless
settings shown on this screen. Check the box after these settings, and then click Next or Finish.
(The settings shown on this screen are for example only. Your settings will not be the same.)
You have completed the wireless setup. If you chose to install the printer driver in step e, Go
to Installing the printer driver on page 91.
Wireless configuration for Macintosh
®
using the Brother automatic installer application
5
90