Monitor Outputs; Output Type Selection; Output Destination Selection; A/B Switch Configuration - Focusrite Rednet R1 User Manual

Outputs . . .

Monitor Outputs

The Monitor Outputs page is used to configure the output groups and to assign audio channels.

Output Type Selection

Click each drop-down
- Mono
- Stereo
- LCR
- 5.1
- 7.1

Output Destination Selection

The audio destination for each channel is assigned using its drop-down:
- Analogue 1-8/16
- ADAT 1-16
- S/PDIF 1-2
• Channels can be renamed by double-clicking on their current channel number
• The output channels selected for Output Types 1-4 remain constant across all Input Source
Groups, however the routing and levels can be modified. See 'Channel Mapping' on next page

A/B Switch Configuration

Select an output for 'A' (blue) and 'B' (orange) to assign the alternate Output Types to the front panel
A/B Switch. The switch colour will toggle (blue/orange) to indicate the currently selected output
The switch will illuminate white if an A/B setup has been configured but the currently selected speaker is neither
A or B. The switch will dim if A/B have not been set up.
to assign its output configuration:
- 5.1.2
- 5.1.4
- 7.1.2
- 7.1.4
- Custom (1 – 12 channels)
- Loopback 1-2
- Dante 1-32
15