Talkback; Talkback Routing; Headphone Setup - Focusrite Rednet R1 User Manual

Talkback

The Talkback page displays the settings of the cross-point grid for the talkback Output selection and
the headphone settings.

Talkback Routing

The routing table allows the user to route a single Talkback channel to 16 locations; the destination
type is shown above the table.
Talkback 1–4 can also be sent to Cue mixes 1–8.
The Talkback Channels can be renamed.
Talkback Setup
Talkback Outline and icon will display as Green when connected to a Red device as expected.
A yellow '!' indicates that routing is present but no audio is allowed to flow, refer to Dante Controller for details
Clicking on the icon automatically updates the routing.
When talkback is active, the monitors will dim by the amount set in the Dim Level window. Click to
enter a value in dB.

Headphone Setup

The Headphone icon will also display as Green tick when connected to a Red device as expected.
A yellow '!' indicates that routing is present but no audio is allowed to flow, refer to Dante Controller for details
17