Advertisement
Quick Links
FUNCTIONAL TRAINER 150LBS X 2
NLFTPR150
OVERALL DIMENSIONS: 59"L X 48"W X 83"H
27 NOVEMBER 2018
FUNCTIONAL TRAINER 150LBS X 2
ASSEMBLY INSTRUCTIONS
Keep This For Warranty
NLFTPR150
LOT:
1-866-420-4560
Northern Lights Fitness
Products Inc.
MADE IN CANADA
Specification
Weight=584.5 lbs
Packed in 9
:78.5"x15.5"5.5
Box 1
:3.87 ft³
:121.5 Lbs
:46.25"x16"x7.5
Box 2
:3.21 ft³
:84 Lbs
:44.5"x11.5"x7.5"
Box 3
:2.22 ft³
:79 Lbs
:12.5"x5"x6.25
Box 4,5,6,7,8&9
:0.226 ft³
:(Each) 50 Lbs
Advertisement
Related Manuals for Northern Lights NLFTPR150
Summary of Contents for Northern Lights NLFTPR150
- Page 1 FUNCTIONAL TRAINER 150LBS X 2 ASSEMBLY INSTRUCTIONS Keep This For Warranty NLFTPR150 LOT: 1-866-420-4560 Northern Lights Fitness Products Inc. MADE IN CANADA Specification Weight=584.5 lbs Packed in 9 :78.5"x15.5"5.5 Box 1 :3.87 ft³ :121.5 Lbs :46.25"x16"x7.5 Box 2 :3.21 ft³...
- Page 2 Parts List Item Item Part QTY. Box/Bag# Part QTY. Box/Bag# Bottom Legs Box 2 3/8"x3/4" Bolt Bag 1 Rear Upright Box 1 3/8"x1 1/4" Bolt Bag 1 Adjustment Column Box 1 3/8"x1 3/4" Bolt Bag 1 Adjustable Pulley Side Left Box 3 3/8"x2 1/4"...
- Page 3 Page:-3 of 9...
- Page 4 Parts required for this page: Item Assemble both side frame assemblies Part QTY. on the floor to ease installation of Bottom Legs lower bolts, then raise up side frames Rear Upright to attach rear braces. Adjustment Column Install 3/8" x 2-1/4" Bolt (D) before Adjustable Pulley Side Left Shroud Attachment Top (11) and then Adjustable Pulley Side Right...
- Page 5 Parts required for this page: Item Part QTY. 23 Weight Stack support 24 Guide Rod 26 Selector Shaft Guide Rod Retainer Shaft Collar Rubber Bumper AA Weight Stack Assembly for left side is detailed; right side is opposite. 6.Place the Weight Stack Support (23) and Rubber Bumpers (X) over the holes in each Bottom Legs (1) and slide Guide Rods (24) into them.
- Page 6 Parts required for this page: Item Part QTY. 13 Chin Up Bar 14 Bar Holder Left 15 Bar Holder Right 18 Rear Pulley Bracket 19 Front Pulley Bracket 20 Pulley U-Bracket Stack 21 Double Pulley Cable Retainer 22 Single Pulley Cable Retainer 25 Chain 3/8"x1 1/4"...
- Page 7 Parts required for this page: Item Part QTY. Cable Handle Cable Assembly for right side is detailed, left side is opposite. 17.Start installing the Cable Assembly (V) at the Dual Swivel Pulley Brackets (6). Feed the end with the ball shank between the two pulleys and proceed in numbered sequence finishing at the Adjustable Pulley Slide (5).Make certain...
- Page 8 Parts required for this page: Item Part QTY. 16 Back Support 17 Accessory Hooks 27* Shroud Mesh (Optional) 3/8"x3/4" Bolt 3/8"x4" Bolt 3/8" Plate Washer 3/8" Locknut Nylon Spacer 3/8" x 1/4" 4 PLACES 2 PLACES Typical Typical 20.Bolt in place the Back Support (16) to the Rear Brace (7) using the shown bolting, do not forget to use a Nylon Spacer (Y) between the Back Support (16) and the Rear Brace (7), top and bottom.
-
Page 9: Warranty
Aucune autre garantie n’a été faite ou Lights product. Northern Lights shall not be sera faite de la part de Northern Lights en ce qui responsible for injury, loss of use of the product, concerne tout produit de Northern Lights ou son inconvenience, loss or damage to personal opération, réparation ou échange.