Advertisement
Quick Links
NL-HILO150, HI LO PULLEY STATION, 150 LBS
Specifications
Weight
=
252 lbs
Packed in 4 Boxes
Box 1
= 74.25" x 12.5" x 9"
= 4.83 ft³
= 102 lbs
Box 2
= 12.5" x 5" x 8.5"
= 0.307 ft³
= 50 lbs (each)
Box 3 & 4
= 12.5" x 5" x 6.25"
= 0.226 ft³
= 50 lbs (each)
ASSEMBLY INSTRUCTIONS
NL-HILO150, HI LO PULLEY STATION 150 lbs
NL-HILO150
Overall Dimensions : 42" W x 42.5" D x 82" H
October 12, 2016
Advertisement
Related Manuals for Northern Lights NL-HILO150
Summary of Contents for Northern Lights NL-HILO150
-
Page 1: Assembly Instructions
NL-HILO150, HI LO PULLEY STATION, 150 LBS ASSEMBLY INSTRUCTIONS Specifications Weight 252 lbs Packed in 4 Boxes Box 1 = 74.25" x 12.5" x 9" = 4.83 ft³ NL-HILO150, HI LO PULLEY STATION 150 lbs = 102 lbs Box 2 = 12.5"... -
Page 2: Parts List
Parts list Item Description ......Qty ... Bag # Item Description ......Qty ..Box # 3/8" x 1-3/4" Bolt ...... 5 ..1 Front Leg ......... 1 ..1 3/8" x 2" Bolt ......2 ..1 Base Assembly ......1 ..1 Back Leg ........ - Page 3 *Optional 17 *...
- Page 4 Tighten by hand 3/8" x 3-1/2" Bolt (F) until Shroud Mesh (16) is installed, then tighten to remove slack in mesh. Typical Typical 1. Bolt Bottom Shroud Holder (15) on Base Assembly (2) and then bolt Front Leg (1) to Base Assembly (2) and to Back Leg (3) using bolting shown.
- Page 5 12 Places 6 Places 2 Places 11 Places START FINISH TYP. 6. Place 2x Rubber Bumpers (S) over the holes in Base Assembly (2) and slide Guide Rods (16) into them. NOTE: For improved performance, we recommend you apply a silicone lubricant to the Guide Rods prior to their installation. 7.
-
Page 6: Warranty
If you feel that a Northern Lights product is defective, please contact our Si un produit de Northern Lights est défectueux, s’il vous plaît parts department at (800) 461-1709.
Need help?
Do you have a question about the NL-HILO150 and is the answer not in the manual?
Questions and answers
I was wondering if there are any clearance requirements of objects or walls for the NLHILO150 model. If so, which side(s) of the model require clearance and how far? Thank you!
The Northern Lights NL-HILO150 model has overall dimensions of 42" W x 42.5" D x 82" H. To ensure proper use and safety, clearance should be provided around all sides, especially the front and back where the pulley mechanism operates. While specific clearance measurements are not provided, allow at least 24 inches of space on all sides for safe access and movement.
This answer is automatically generated
Where can I purchase new/replacement assembly parts?