Maintenance - Fora COMFORT check G40 Owner's Manual

switch off automatically.
• Control solution results are NOT included in the day average.
• If using the meter for the first time, "---" displays when you recall the
test results or review the average result. It indicates that there is no
test result in the memory.

Maintenance

Battery
Your meter comes with one 3V CR2032 lithium battery.
Low Battery Signal
The " " symbol appears along with display messages: The
meter is functional and the result remains accurate, but it is time
to change the battery.
The " " symbol appears with E-b, Error and low: The
power is not enough to do a test. Please change the battery
immediately.
Replacing the Battery
To replace the battery, make sure that the meter is turned off.
Step 1: Press the edge of the battery cover and lift it up to
remove.
Step 2: Remove the old battery and replace with one 3V CR2032
lithium battery.
Step 3: Close the battery cover. If the battery is inserted
correctly, you will hear a "beep" afterwards.
CR2032
SET
BATTERY
Note:
• Replacing the battery does not affect the test results stored in the
memory.
EN-12
CR2032
SET SET
BATTERY BATTERY
CR2032