Use Of Extension Cords - GE Profile Series Owner's Manual
Side by side refrigerators
Hide thumbs
Also See for Profile Series:
- User manual ,
- Owner's manual and installation instructions (152 pages) ,
- Owner's manual & installation instructions (56 pages)
Table of Contents
Advertisement
Available languages
Available languages
The larger slot in the adapter must be aligned with the larger slot in
the wall outlet to provide proper polarity in the connection of the
power cord.
When disconnecting the power cord from the adapter, always hold
the adapter in place with one hand while pulling the power cord
plug with the other hand. If this is not done, the adapter ground
terminal is very likely to break with repeated use.
If the adapter ground terminal breaks, DO NOT USE the refrigerator
until a proper ground has been established.
Attaching the adapter ground terminal to a wall outlet cover screw does not
ground the appliance unless the cover screw is metal, and not insulated, and the
wall outlet is grounded through the house wiring. You should have the circuit
checked by a qualified electrician to make sure the outlet is properly grounded.
USE OF EXTENSION CORDS
Because of potential safety hazards under certain
conditions, we strongly recommend against the use of an
extension cord.
However, if you must use an extension cord, it is absolutely
necessary that it be a UL-listed, 3-wire grounding type appliance
extension cord having a grounding type plug and outlet and that
the electrical rating of the cord be 15 amperes (minimum) and
120 volts.
REMEMBER...
Your continued health and safety are important to us.
Please read and follow this Safety Information carefully.
We want you to remain a happy and healthy part of our
GE family.
SAVE THESE INSTRUCTIONS
7
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the Profile Series and is the answer not in the manual?
Questions and answers
Does the water filter light turn green when filter is installed properly on Model# PFCF1PJYA WW?
Our hands-free GE profile refrigerators auto fill is shutting off before sensing full says error
The hands-free Autofill feature on the GE Profile refrigerator is designed to fill containers up to approximately 90% full using ultrasonic sensors to detect the container size. It shuts off before sensing full to prevent overflows and spills by stopping short of completely filling the container.
This answer is automatically generated
My water in the door (GE Profile Performance circa 2000) is taking upto 10 seconds to dispense water after a day or two of non use. Where can l look to solve this issue? Also last night water was coming out from under the fridge. I installed an heavy 3/16" plate under the fridge so the wheels wouldn't cause a dent in the floor and make it hard to initially move. The water was between the plate and the floor but the top of the plate was dry. Where do l start to look for a solution? Thank you very