GE Profile Series Owner's Manual page 9

Side by side refrigerators
Table of Contents

Advertisement

Available languages

Available languages

Automatic Energy Saver System
You won't find an energy saver switch on this refrigerator.
Warm liquid from the refrigerator's condenser is automatically
circulated around the front edge of the freezer compartment to
help keep moisture from forming on the outside of the refrigerator
during humid weather.
Many refrigerators use special electric heaters. This refrigerator
needs none. That's why there is no energy saver switch...there's no
need for it.
How To Test Temperatures
Use the milk test for the fresh food compartment. Place a container
of milk on the top shelf and check it a day later. If the milk is too
warm or too cold, adjust the temperature controls.
Use the ice cream test for the freezer compartment. Place a
container of ice cream in the center of the freezer and check it after
a day. If it's too hard or too soft, adjust the temperature controls.
After changing the controls, allow 24 hours for the refrigerator to reach the
temperature you have set.
Food Storage
The type of packaging used and the storage temperatures will affect
how long food will keep in the refrigerator.
New food storage guidelines are constantly being developed.
Consult the County Extension Service for the latest information on freezing and
storing foods.
9

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Profile Series and is the answer not in the manual?

Questions and answers

Amelia J. Chivers
February 11, 2025

Does the water filter light turn green when filter is installed properly on Model# PFCF1PJYA WW?

Don
February 26, 2025

Our hands-free GE profile refrigerators auto fill is shutting off before sensing full says error

Raymond Orr
May 4, 2025

My water in the door (GE Profile Performance circa 2000) is taking upto 10 seconds to dispense water after a day or two of non use. Where can l look to solve this issue? Also last night water was coming out from under the fridge. I installed an heavy 3/16" plate under the fridge so the wheels wouldn't cause a dent in the floor and make it hard to initially move. The water was between the plate and the floor but the top of the plate was dry. Where do l start to look for a solution? Thank you very

Table of Contents

Save PDF