GE Profile Series Owner's Manual page 31

Problem
Vibration or
rattling
Fresh food or freezer
compartment too warm
Frost or ice crystals on
frozen food
Divider between fresh
food and freezer
compartment feels warm
Automatic icemaker
does not work
(on some models)
Slow ice cube freezing
Possible Causes
Front roller screws or
front leveling legs need
adjusting.
Slight vibration is
normal.
Temperature control
not set cold enough.
Warm weather or
frequent door openings.
Door left open.
Door left open.
Too frequent or too
long door openings.
Frost within package is normal.
Automatic energy saver
system circulates warm
liquid around front edge
of freezer compartment.
Icemaker feeler arm in
the STOP (up) position.
Water supply turned
off or not connected.
Freezer compartment
too warm.
Piled up cubes in the
storage bin may cause
the icemaker to shut
off prematurely.
Door left open.
Temperature control
not set cold enough.
What To Do
• See the Rollers section.
•
Try moving dishes around
in refrigerator.
See the About the controls
•
on the refrigerator section.
•
Set the temperature
control one step colder.
See the About the controls
on the refrigerator section.
•
Check to see if package is
holding door open.
• Check to see if package is
holding door open.
•
This helps prevent
condensation on the
outside.
•
Move the feeler arm to the
ON (down) position.
•
Cubes may have fused to
the side of the mold.
Remove these cubes.
• See the Installing the
water line section.
• Wait 24 hours for the
refrigerator to completely
cool down.
•
Remove storage bin from
freezer and level cubes by
hand.
•
Check to see if package is
holding door open.
See the About the controls
•
on the refrigerator section.
31