GE Profile Series Owner's Manual page 21

Side by side refrigerators
Table of Contents

Advertisement

Available languages

Available languages

Replacing the light bulbs.
Turning the control to the OFF position does not remove power to the
light circuit.
Fresh Food Compartment—Two Lower Lights
These lights are located behind the top drawer.
After replacing with an appliance bulb of the same or lower wattage, replace the
shield, drawer and cover and plug the refrigerator back in.
Freezer Compartment
After replacing with an appliance bulb of the same or lower wattage, reinstall the
shield and the shelf and plug the refrigerator back in.
Fresh Food Compartment—Upper Light
1
Unplug refrigerator.
2
Pull off the temperature control knobs.
3
Pull bottom of the light shield down and forward,
then rotate the top up and off.
After replacing with an appliance bulb of the same or lower
wattage, reinstall the light shield and plug the refrigerator back in.
1
Unplug the refrigerator and remove the top drawer and cover.
2
Grasp the bottom edge of the shield and pull forward and up to
free its bottom edge.
1
Unplug the refrigerator.
2
Remove the shelf just below light shield. (The shelf will be
easier to remove if it is emptied first.)
3
Pull the light shield toward you to reach the bulb.
(on some models)
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents