Advertisement
Quick Links
1. Introduction
This manual contains installation and operation instructions for the JC crane scale. Please read
the manual completely before installation and operation.
2. Precautions
Before using, please check and make sure every part is in good condition. Provided there is
any broken, please inform your dealer
Avoid sudden temperature changes (suitable operating temperature is between -10℃~
40℃. )
Disconnect the power supply when cleaning the scale.
Do not use the scale in the rain or heavily polluted environment.
Never use the crane over the maximum permitted weight, it will cause danger of breaking.
Always make sure that there are no living beings or materials below the load that could
cause injured or damaged.
Service should be performed by authorized personnel only.
3. Dimension
Model
JC-600
JC-1000
JC-2000
JC-3000
JC-5000
JC-10000
JC User Manual
A
B
260
195
260
195
260
195
260
195
260
195
260
205
C
D
33
22
515
47
34
530
47
34
530
50
40
547
60
48
634
70
52
735
JC
E
F
G
76
200
76
200
76
200
76
200
80
220
90
230
1
Advertisement
Related Manuals for Jadever JC
Summary of Contents for Jadever JC
- Page 1 JC User Manual 1. Introduction This manual contains installation and operation instructions for the JC crane scale. Please read the manual completely before installation and operation. 2. Precautions Before using, please check and make sure every part is in good condition. Provided there is any broken, please inform your dealer ...
- Page 2 4. Specifications & Features 4-1 Specifications Model JC-600 JC-1000 JC-2000 JC-3000 JC-5000 JC-10000 Capacity(kg) 1000 2000 3000 5000 10000 Division 1 (kg) Division 2 (kg) 5 digits, 30mm character height, red backlit LED display Display 100% Capacity Zero Range ≤10s...
- Page 3 seconds it will turn back to zero and ready for operation Note: It is recommended to allow scale 3-5min of warm-up time before starting weighing operation. 6-2 Zero Press ZERO to zero the display 6-3 Weighing Begin with no load on the scale, the display reading zero. Place item(s) to be weighted on the scale.
- Page 4 6. Press HOLD or SWITCH to shift the zero modes. 0=zero function is allowed when not stable 1=zero function is not allowed when not stable 7. Press ZERO to move to saving setting, while “ ” is displayed on the screen 8.