Table of Contents
Advertisement
3. Receiving Invacare® Octave
Due to condensation, the bed may not be used until it has reached room temperature (10-50
Check whether the bed shows any signs of damage. If the bed is damaged, see terms of delivery.
After each assembly, check that all fittings are properly tightened and that all parts have the correct
function.
The bed's - mattress support and base frame - will be delivered assembled on a trolley.
By ordering a standard bed the following parts will be delivered:
x
Assembled bed on trolley.
x
Fitting (2 pcs.) incl. mounting screws (8 pcs.).
x
Wooden-bed ends (2 pcs.).
The following can be delivered an option: (see chapter 8 for order no.).
x
BRITT wooden side rails/Line Alu (a pair), only for L=200 cm (standard in the UK).
x
Wooden bar (4 pcs.) incl. mounting screws (8 pcs.).
x
Support handle.
x
Lifting pole incl. mounting screws (2 pcs.).
x
Mattress support extension 10 cm. Can be used in head- and bed end.
3.1 Parts of a standard bed
1.
Base with central braking system.
2.
Inner shear arm.
3.
Outer shear arm.
4.
Motor, hi/low.
5.
Motor for back rest.
6.
Motor - thigh section (with control
unit).
7.
Motor - leg section
8.
Top frame incl. seat section.
9.
Back rest.
10. Thigh section
11. Leg section
12. Fitting
13. Wooden - bed ends.
TM
11
o
C).
Advertisement
Table of Contents
