Invacare Octave User Manual
  1. Manuals
  2. Brands
  3. Invacare Manuals
  4. Medical Equipment
  5. Octave
  6. User manual

Invacare Octave User Manual

Hide thumbs Also See for Octave:
Table of Contents

Advertisement

Quick Links

Download this manual
TM
Invacare®Octave
User Manual (EN)

Advertisement

Table of Contents
loading

Related Manuals for Invacare Octave

Summary of Contents for Invacare Octave

  • Page 1 Invacare®Octave User Manual (EN)

  • Page 2: Table Of Contents

    1. General Information ........3 2. Operating the Octave .

  • Page 3: General Information

    The hand control, control unit and motors are protected according to IPX6 or IPX4. A lock cam must be used on the control unit - if not, Invacare®can not guarantee the IP protection. All service work described in chapter 7 may only be performed by personnel who have been trained or instructed by Invacare®...
  • Page 4 1.3 Labels and symbols Symbols in this user manual: WARNING Indicates a hazardous situation that could result in serious injury or death if it is not avoided. INFORMATION Gives useful tips, recommendations and information for efficient, trouble-free use. This product complies with Directive 93/42/EEC concerning medical devices. The launch date of this product is stated in the CE Declaration of conformity.
  • Page 5 To identify the product please look at the product label: Type no. of the bed. Electrical information Serial no. Current in Voltage in Int. Intermitens Alternating current Maximum minutes kilogram Ampere Date of production. Symbols IPX4 or IPX6 depend- ing on configuration. 1.4 Description of the main parts in the mattress support: Leg section Back rest...
  • Page 6 Invacare® accepts no liability for any use, change or assembly of the product other than as stated in Invacare® accepts no liability for any use, change or assembly of the product this User Manual.

  • Page 7: Operating The Octave

    All manufacturing faults or defects must be promptly reported Invacare® may repair the fault or replace the component. The warranty provided by Invacare® does not cover additional costs (transport, packaging, labour, sundry expenses, etc. are for the customer’s account).
  • Page 8 2.1 Operating the Invacare® Octave with the hand control To operate the mattress support, the bed is equipped with one of the following types of hand controls: HB 80 or HL 80 with integrated ACP function (key) UP / DOWN...
  • Page 9 The castors might under special conditions be difficult to manoeuvre due to the floor covering being untreated or in poor condition. In matters of doubt, Invacare® recommends the placement of a suitable type of protection between the castors and the floor.
  • Page 10 2.4 Adjusting the height of the lifting pole Loosen the cord as shown in fig. A. The lifting handle can now be adjusted to the desired height. Press the cord together as shown in fig. B and check that the cord is locked in the cord lock by pulling the handle as shown in figure C.
  • Page 11 3. Receiving Invacare® Octave Due to condensation, the bed may not be used until it has reached room temperature (10-50 Check whether the bed shows any signs of damage. If the bed is damaged, see terms of delivery. After each assembly, check that all fittings are properly tightened and that all parts have the correct function.
  • Page 12 The connection to the socket outlet must always be accessible in case an electric error should occur For ergonomic working position: Raise the bed (hi/low) to approx. 60 cm above floor level. (See section 2 “Operation of the Invacare® Octave ”). 1. Assembling the fittings Push bed end through the pipes on the top frame.
  • Page 13 3.4 Mounting the Britt wooden side rail/Line Alu (accessories) Raise the bed about one third. Mount one end at a time. Lift the upper bar and guide the slide bracket to the bed end rail (A). Press the locking pin of the side rail with a finger (B). Guide the side rail to the upper position.

  • Page 14: Disassembly Of Parts

    3.7 Mounting the mattress support extension (10 cm) Note! It is not possible to use the wooden side rail in combination with the mattress support extension. Therefore dismount the wooden side rails first. The mattress support extension can be mounted in either the head- or foot end or in both ends.

  • Page 15: Wiring

    The cables must be mounted in such a way that they are kept clear of the floor and do not block the castors. A lock cam must be used on the control unit - if not, Invacare®cannot guarantee the IP protection.

  • Page 16: Part Numbers For Accessories

    6. Part numbers for accessories Article Dimensions Order no. Line side rail (beech, complete) ............1522786-0125 Line side rail, extendable (beech, complete) .

  • Page 17: Cleaning And Maintenance

    7. Cleaning and maintenance The base frame must be supported during service inspections to prevent accidental lowering Only personnel who have received the necessary instructions or training may perform service and mainte- nance of the bed. With normal daily use, service must be carried out according to the service schedule after 2 years use and thereafter every second year.
  • Page 18 7.2 Maintenance A service contract can be made in the countries, where Invacare® has its own sales company. In certain countries Invacare® offers courses in service and maintenance of the Octave . Spare parts lists and additional user manuals are available from the Invacare® homepage.
  • Page 19 7.4 Maintenance chart Service and maintenance of the Invacare® Octave must only be performed by personnel who have received the necessary instruction or training. S/N (located on the mattress support): ___________________ Date: Initials.: Circlips and cotter pins checked. Screws tightened.

  • Page 20: Trouble-Shooting The Electrical System

    8. Trouble-shooting the electrical system Note! Make sure that the mains are connected. Symptom Possible cause Remedy 1) Mains not connected. 1) Connect mains. Mains indicator does not light up. 2) Fuse in the control unit is blown. 2) Replace the control unit. 3) Control unit defective.

  • Page 21: Electrical Data

    9. Electrical data Voltage supply: 230 Voltage AC/50 Hz. Max. current input: 3 A. Intermittent (Duty cycle of motors): Int.10% 2 min/18 min. Degree of protection: IPX6 * or IPX4 ** Sound level: 48 dB (A) Double insulated, class II Alternating current: Applied Part, Type B, complying with the specified requirements for protection against electrical shock according to IEC60601-1.
  • Page 22 IEC 61000-3-3 Guidance and manufacturer´s declaration – electromagnetic immunity The Octave Bed is intended for use in the electromagnetic environment specified below. The customer or the user of the Octave Bed should assure that it is used in such an environment.
  • Page 23 RF communications equipment and the Octave Bed The Octave Bed is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the Octave Bed can help prevent electromagnetic interference by...
  • Page 24 RF communications equipment and the Octave Bed The Octave Bed is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the Octave Bed can help prevent electromagnetic interference by...

  • Page 25: Technical Specifications

    All measurements are stated in cm. All angles are stated in degrees. All measurements and angles are stated without tolerances. Invacare® reserves the right to change the stated measurements and angles without preceding warning. Max patient weight: 350 kg (provided the equipment - bed ends, side rails, support handles, lifting pole and mat- tress have a total weight of max 35 kg).
  • Page 26 Mattress dimensions 10.1 Safety aspects regarding combination of side rails and mattresses: – In order to obtain the highest possible safety level, when using the bed in combination with side rails, it is important to respect the minimum and maximum measures for mattresses stated in the table.

  • Page 27: Weight

    11. Weight Mattress support......72,0 Base incl. shear arm ..... . 71,0 Bed end fitting .
  • Page 28 Italy New Zealand Australia INVACARE MECC SAN s.r.l. INVACARE NZ INVACARE Australia Pty Ltd Via dei Pini 62 4 Westfield Place, 1 Lenton Place, North Rocks IT-36016 Thiene (VI) Mt. Wellington AU-NSW 2151 Phone: +39 0445 38 00 59...

Table of Contents