Motorola MTM5 00 Series Basic Service Manual page 84

6 - 28
18. Pull back the strain relief of the spiral cord cable by pushing the spiral cord inside towards the
Handset front housing.
Front housing
19. Unplug the two wire to board connectors of the spiral cord cable from the keypad flex.
20. Remove the spiral cord cable from the Handset front housing by pushing the two wire to board
connectors in vertical position out of the Handset front housing. Refer to Figure 6-36.
Figure 6-34 Spiral Cord Cable Connectors Removal
Handset front housing
Figure 6-35 Spiral Cord Cable Removal 1
Figure 6-36 Spiral Cord Cable Removal 2
Wire to board connectors
Strain relief
Pull out strain relief
Push in
spiral cord
Unplug these 2 wire to board
connectors
Make sure that these 2 wire to board
connectors are in vertical position
before pushing out from the Handset
front housing
Maintenance
ZWG0130215-O
ZWG0130215-O
ZWG0130215-O