Setting Your Changes As The New Default; Restoring All Settings To The Factory Settings; Scan To A Memory Card Or Usb Flash Memory Drive; Entering Scan Mode - Brother MFC-5890CN User Manual

PhotoCapture Center™: Printing photos from a memory card or USB Flash memory drive
Setting your changes as the
new default
You can save the print settings you use most
often by setting them as the default settings.
These settings will stay until you change
them again.
a
Press a or b to choose your new setting.
Press OK.
Repeat this step for each setting you
want to change.
b
After changing the last setting, press
a or b to choose Set New Default.
Press OK.
c
Press 1 to choose Yes.
d
Press Stop/Exit.
Restoring all settings to the
factory settings
You can restore all the settings you have
changed to the factory settings. These
settings will stay until you change them again.
a
Press a or b to choose
Factory Reset.
Press OK.
b
Press 1 to choose Yes.
c
Press Stop/Exit.
Scan to a memory card
or USB Flash memory
12
drive

Entering Scan mode

When you want to scan to a memory card or
USB Flash memory drive, press
(Scan).
The LCD shows:
Scan to E-mail Scan to E-mail
Scan to Image Scan to Image
Scan to OCR Scan to OCR
Scan to File Scan to File
Scan to Media Scan to Media
SCAN
Press a or b to choose Scan to Media.
Press OK.
If you are not connected to your computer
12
only the Scan to Media selection will appear
on the LCD.
(See Scanning for Windows
the Software User's Guide on the CD-ROM
for details about the other menu options.)
12
12
Scan a document Scan a document
directly to a media directly to a media
card or USB card or USB
flash flash
memory. memory.
Select & Press OK
®
or Macintosh in
121
12