Brother MFC-3240C Quick Setup Manual page 13

For Mac OS
Make sure that you have completed the instructions from Step 1 "Setting Up
the Machine" on pages 2 - 6.
1
Disconnect the machine from the power
socket and from the Macintosh
already connected an interface cable.
2
Turn on your Macintosh
3
Insert the supplied CD-ROM into your
CD-ROM drive.
4
Double-click the Start Here icon to install
the printer and scanner drivers. If the
language screen appears, select your
language.
5
Click MFL-Pro Suite to install.
6
Follow the on-screen instructions, and
restart your Macintosh
7
Connect the USB interface cable to your
®
Macintosh , and then connect it to the
machine.
To connect the USB cable to the machine:
1. Open the top cover to its open position.
2. Connect the USB cable into the USB
socket, marked with a
will find the USB socket above and to the
left of the ink cartridge slots, as shown
below.
3. Carefully guide the USB cable into the
trench as shown below, following the
trench round and toward the back of the
machine.
®
8.6 to 9.2
®
, if you have
®
.
®
.
symbol. You
Warning
Ensure that the cable does not restrict the cover from
closing, or an error may occur.
DO NOT connect the machine to a
USB port on a keyboard or a non
powered USB hub.
8
Gently close the top cover.
9
Turn on the machine by plugging in the
power cord.
0
®
From the Apple menu, open the Chooser.
A
Click the Brother Ink icon.
On the right side of the Chooser, select the
machine to which you want to print.
Close the Chooser.
The Brother Printer driver and Scanner
driver have been installed.
B
®
To install Presto! PageManager
Presto! PageManager icon and follow the
on-screen instructions.
You can easily scan, share and organize
photos and documents using Presto!
®
PageManager .
®
Presto! PageManager
installed and the installation is now
complete.
®
, click the
®
®
has been
11