Turning The Mfc To Power Save Condition - Brother MFC-210C User Manual

Turning the MFC to Power Save condition

When the MFC is idle, you can turn it to Power Save condition by
pressing the Power Save key. In Power Save mode, the MFC will
receive telephone calls as normal. For further information on
receiving faxes in the power save condition, please see the table on
page 1-5. The delayed faxes that have been set up will be sent
(MFC-410CN only). You can even retrieve faxes using Remote
Retrieval if you are away from your MFC (MFC-410CN only). If you
want to do other operations, you must turn the MFC back on.
Turning the MFC to Power Save condition
Press and hold down the
key until the LCD shows:
The LCD light will go off.
Turning the MFC to Power Save condition off
Press and hold down the
key until the LCD shows:
The LCD will show the date and time (Fax
mode).
Even if you turned the MFC off, it will periodically clean the print
head to preserve print quality.
If you unplug the AC power cord, no MFC operations will be
available.
You can turn the MFC Off by customizing the
as shown next page. In this Off mode, no MFC operation will be
available. (See Power Save Setting on page 1-5.)
The external telephone is always available.
1 - 4 INTRODUCTION
Power Save
Power Save
Shutting Down
Please Wait
Power Save
key