Setting Fax Storage; Setting Pc Fax Receive - Brother MFC-210C User Manual

Setting Fax Storage

If you select Fax Storage, your MFC stores the received fax in the
memory. You will be able to retrieve fax messages from another
location using the Remote Retrieval commands.
1
Menu/Set
Press
2
Press or
▲
Menu/Set
Press
3
Stop/Exit
Press
If you have set Fax Storage, a backup copy of the received fax
will automatically be printed at the MFC.

Setting PC Fax Receive

If you select PC Fax Receive, your MFC will temporarily store your
received fax messages in its memory, and then automatically send
the faxes to the PC. You can then use your PC to view and store
these faxes.
1
Menu/Set
Press
2
Press or
▲
Menu/Set
Press
3
Press or
▲
Print:On or Backup Print:Off .
Menu/Set
Press
4
Stop/Exit
Press
■
Before you can set up PC Fax Receive you must install the
MFL-Pro Suite software on your PC. Make sure your PC is
connected and turned on. (For details see Using Brother
PC-FAX software on page 5-1 in Software User's Guide on
the CD-ROM.)
■
If you select Backup Print:On , the MFC will also print the
fax at your MFC so you will have a copy if there is a power
failure before it is sent to the PC.
■
If you get an error message and the MFC cannot print the
faxes in memory, you can use this setting to transfer your
faxes to your PC. (For details, see Error messages on page
11-1.)
6 - 2 REMOTE FAX OPTIONS (MFC-410CN ONLY)
2 5 1
, , , .
to select Fax Storage .
▼
.
.
2 5 1
, , , .
to select PC Fax Receive .
▼
.
to select Backup
▼
.
.
PC Fax Receive
Backup Print:On