Real Time Transmission - Brother MFC-210C User Manual

Real Time Transmission

When you are sending a fax, the MFC will scan the documents into
the memory before sending. Then, as soon as the phone line is free,
the MFC will start dialling and sending.
If the memory becomes full, the MFC will send the document in real
time (even if Real Time TX is set to Off ).
Sometimes, you may want to send an important document
immediately, without waiting for memory transmission. You can set
Real Time TX to On for all documents or for the next fax only.
If you want to fax multiple pages from the scanner glass, Real Time
Transmission should be set to Off .
1
If it is not illuminated in green, press
2
Load your document.
3
For MFC-210C, press
For MFC-410CN, press
4
To change the default setting, press
Menu/Set
Press
—OR—
For the next fax transmission only, press
Next Fax Only .
Menu/Set
Press
5
Press or
▲
Menu/Set
Press
In Real Time Transmission, the redial feature does not work.
If you are sending a colour Fax, the MFC will send it in real time
(even if Real Time TX is set to Off ).
3 - 8 SETUP SEND
Menu/Set
Menu/Set
.
.
to select On (or Off ).
▼
.
Fax
(
2 2 3
, , , .
2 2 5
, , , .
or to select On (or Off ).
▲ ▼
or to select
▲ ▼
).