Installing The Phone Line And Power Cord - Brother MFC-210C Quick Setup Manual

Installing the Phone Line
4
and Power Cord
1
Connect the power cord.
2
Connect the telephone line cord.
Connect one end of the telephone line cord
to the jack on the MFC marked LINE and the
other end to a modular wall jack.
DO NOT connect the USB cable yet.
Warning
■ The MFC must be connected to a grounded/
earthed plug.
■ Since the MFC is grounded through the power
outlet, you can protect yourself from potentially
hazardous electrical conditions on the telephone
network by keeping the power switched on when
you connect the MFC to a telephone line. Similarly,
you can protect yourself when you want to move
your MFC by disconnecting the telephone line first
and then the power cord.
If you are sharing one phone line with an
external telephone, connect it as shown
below.
If you are sharing one phone line with an
external telephone answering machine,
connect it as shown below.
Please set the Receive Mode to "External
TAD" if you have an external answering
machine. (MFC-210C, MFC-420CN only)
For more details, see "Connecting an
external device to your MFC" in the
Appendix of the User's Guide.
TAD
TAD
5