Install The Power Cord And Phone Line - Brother FAX-2820 Quick Setup Manual

Setting Up the Machine
4
Put paper in the paper tray.
Check that the paper is flat in the tray and
below the maximum paper mark.
5
Put the paper tray firmly back into the
machine and unfold the output paper tray
support flap before you use the machine.
Output paper tray
support flap
For details on supported paper
specifications, see "About paper" in Chapter
1 of the User's Guide.
6
Maximum
paper mark
Install the Power Cord
4
and Phone Line
1
Make sure that the power switch is off.
Connect the AC power cord to the machine.
2
Plug the AC power cord into an AC outlet.
Turn the power switch on.
3
Connect one end of the telephone line cord
to the socket on the machine marked LINE
and the other end to a modular wall socket.