Setting Up The Message Center (Mfc-620Cn Only); Selecting Your Language (Canada Only); Sending In The Product Registration And Test Sheet (Usa Only) - Brother MFC-210C Quick Setup Manual

Setting Up the Message
11 Center
(MFC-620CN only)
You must record an outgoing message in order to use
the Message Center mode.
1
Record Message Center Outgoing
Message (MSG CTR OGM).
See "Recording Message Center Outgoing
Message" in Chapter 7 of the User's Guide.
2
Activate Message Center mode.
Press and hold
LCD shows:
Light
If the Message Center Mode is ON, it over
rides your Receive Mode setting. The
built-in digital Message Center answers
voice calls. If the call is a fax, you can
receive a fax automatically.
For more details, see "Message Center" in
Chapter 7 of the User's Guide.
Selecting Your
12
Language (Canada only)
1
Press Menu/Set.
2
Press 0.
3
Press 0.
4
Select your language
▲ ▼
by using or , and then press Menu/Set.
Language:English
5
Press Stop/Exit.
until it lights and the
MC:Msg Ctr
(English or French)
Sending in the Product
13 Registration and Test
Sheet (USA only)
1
Fill out the Product Registration and Test
Sheet.
2
Place the sheet face down in the Automatic
Document Feeder or the scanner glass.
Make sure (Fax) is illuminated in
Green.
3
Enter the toll-free fax number:
1-877-268-9575.
4
Press Black Start.
You will receive a confirmation fax of your
Product Registration.
You can also register your product online
using the On-Line Registration link from the
installation CD-ROM or go to
http://www.brother.com/registration
Go to Next page to
install the driver
11