Tray Use In Copy Mode; Tray Use In Print Mode - Brother DCP-8060 User Manual
Brother dcp-8060: users guide
Hide thumbs
Also See for DCP-8060:
- Software user's manual (171 pages) ,
- User manual (90 pages) ,
- Quick setup manual (37 pages)
Table of Contents
Advertisement
Chapter 3
Tray use in Copy mode
You can change the default tray priority that
the machine will use for printing copies.
When you select Tray#1 Only, MP Only or
1
, the machine loads the
Tray#2 Only
paper only from that tray. If the selected tray
is out of paper, No Paper will appear on the
LCD. Insert the paper in the empty tray.
When you select T1>T2>MP, the machine
takes paper from Tray #1 until it is empty,
then from Tray #2, then from the MP tray.
When you select MP>T1>T2, the machine
takes paper from the MP tray until it is empty,
then from Tray #1, then from Tray #2.
To change the tray setting follow the
instructions below:
a
Press Menu, 1, 5, 1.
15.Tray Use
1.Copy
a
MP>T1
b
T1>MP
Select
ab
& OK
b
Press a or b to select Tray#1 Only,
1
, MP Only, MP>T1>T2
Tray#2 Only
1
or T1>T2
>MP. Press OK.
1
Tray#2 Only and T2 appear only if the
optional tray is installed.
c
Press Stop/Exit.
Note
• When loading the documents from the
ADF and MP>T1>T2 or T1>T2>MP is
selected, the machine looks for the tray
with the most suitable paper and takes
paper from that tray. If no tray has suitable
paper, the machine takes paper from the
tray with the highest priority.
• When using the scanner glass, your
document is copied from the tray with the
highest priority even if more suitable paper
is in another paper tray.
16
Tray use in Print mode
3
You can change the default tray priority the
machine will use for printing from your
computer.
When you select Tray#1 Only, MP Only or
Tray#2 Only
paper only from that tray. If the selected tray
is out of paper, No Paper will appear on the
LCD. Insert the paper in the empty tray.
When you select T1>T2>MP, the machine
takes paper from Tray #1 until it is empty,
then from Tray #2, then from the MP tray.
When you select MP>T1>T2, the machine
takes paper from the MP tray until it is empty,
then from Tray #1, then from Tray #2.
a
Press Menu, 1, 5, 2.
15.Tray Use
2.Print
a
MP>T1
b
T1>MP
Select
b
Press a or b to select Tray#1 Only,
Tray#2 Only
or T1>T2
1
1
Tray#2 Only and T2 appear only if the
optional tray is installed.
Note
• The setting in the printer driver will take
priority over the setting made on the
control panel.
• If the control panel is set to
Tray#1 Only, Tray#2 Only, MP Only
or MP>T1>T2 and you choose 'Auto
Select' in the printer driver, the tray use
will be MP>T1>T2.
If the control panel is set to T1>T2>MP and
you choose 'Auto Select' in the printer
driver, the tray use will remain T1>T2>MP.
1
, the machine loads the
ab
& OK
1
, MP Only, MP>T1>T2
1
>MP. Press OK.
3
1
Advertisement
Table of Contents
