Scanning Difficulties - Brother DCP-8060 User Manual

Printing Difficulties (Continued)
Difficulties
The machine prints the first couple
of pages correctly, then some
pages have text missing.
The machine cannot print full
pages of a document.
Out of Memory message
appears.
The headers or footers in the
document are displayed on the
screen but they do not show up
when it is printed.
The machine does not print on both
sides of the paper even though the
printer driver setting is Duplex.
(DCP-8065DN only)
The machine is not printing or has
stopped printing and the machine's
status LED is yellow.

Scanning Difficulties

Difficulties
TWAIN errors appear while
scanning.
Suggestions
Your computer is not recognizing the machine's input buffer's full signal. Make
sure that you connected the interface cable correctly. (See the Quick Setup
Guide.)
Reduce the printing resolution. (See Advanced tab in the Software User's
Guide on the CD-ROM.)
Reduce the complexity of your document and try again. Reduce the graphic
quality or the number of font sizes within your application.
Add more memory. See Installing extra memory on page 49.
There is an unprintable area on the top and bottom of the page. Adjust the top and
bottom margins in your document to allow for this.
Check the paper size setting in the printer driver. You need to select either A4,
Letter, Legal or Folio.
Press Job Cancel. As the machine cancels the job and clears if from the memory
it may produce an incomplete printout. Try to print again.
Suggestions
Make sure that the Brother TWAIN driver is chosen as the primary source. In
®
PaperPort , click File, Scan and choose the Brother TWAIN driver.
Troubleshooting and routine maintenance
51