Loading Documents And Paper; Loading Documents; Using The Adf - Brother DCP-8060 User Manual

2

Loading documents and paper

Loading documents

All scan and copy operations can be
performed from the ADF or the scanner glass
(Flatbed).

Using the ADF

You can use the ADF (automatic document
feeder) to scan or copy sheets of paper. The
ADF feeds each sheet one at a time.
When loading the ADF, make sure that
documents written with ink are completely
dry.
Single-Sided Document
Documents must be from 148.0 to 215.9 mm
wide (5.8 to 8.5 inches) wide and from 148.0
to 355.6 mm (5.8 to 14 inches) long, and of a
standard weight (80 g/m
2-Sided Document
(DCP-8065DN only)
When you load a 2-sided document, the
document must be from 148.0 to 215.9 mm
(5.8 to 8.5 inches) wide and from 148.0 to
297.0 mm (5.8 to 11.7 inches) long.
For information on the capacity of the ADF
see Specifications on page 91.
8
2
2
2
(20 lb)).
a
Unfold the ADF document output
support flap (1).
1
b
Fan the pages well.
c
Place your documents face up, top edge
first in the ADF until you feel them touch
the feed roller.
d
Adjust the paper guides to fit the width of
your documents.
CAUTION
To avoid damaging your machine while
using the ADF, do not pull on the document
while it is feeding.
To scan non-standard documents see
Using the scanner glass (Flatbed) on page
9.
2