Making N In 1 Copies Or A Poster - Brother DCP-8060 User Manual

Making N in 1 copies or a
poster
You can reduce the amount of paper used
when copying by using the N in 1 copy
feature. This allows you to copy two or four
pages onto one page, which lets you save
paper.
You can also make a poster. When you use
the poster feature your machine divides your
document into sections, then enlarges the
sections so you can assemble them into a
poster. If you want to print a poster, use the
scanner glass.
Important
Please make sure the paper size is set to
Letter, A4, Legal or Folio.
(P) means Portrait and (L) means
Landscape.
You cannot use the Enlarge/Reduce
setting with the N in 1 and poster features.
You can only make one poster copy at a
time.
a
Load your document.
b
Use the dial pad to enter the number of
copies (up to 99).
c
Press N in 1.
d
Press a or b to select 2 in 1 (P),
2 in 1 (L), 4 in 1 (P),
4 in 1 (L), Poster (3 x 3) or
Off (1 in 1).
Press OK.
e
Press Start to scan the page.
If you are making a poster or placed the
document in the ADF, the machine
scans the pages and starts printing.
If you are using the scanner glass,
go to f.
5
f
After the machine scans the page,
press 1 to scan the next page.
Flatbed Copy:
Next Page?
a 1.Yes
b
2.No
Select ab
g
Put the next page on the scanner glass.
Press OK.
Repeat f and g for each page of the
layout.
h
After all the pages have been scanned,
press 2 to finish.
5
Making copies
& OK
5
27