General Setup; Paper Settings; Paper Type; Paper Size - Brother DCP-8060 User Manual

3

General setup

Paper settings

Paper Type

Set up the machine for the type of paper you
are using. This will give you the best print
quality.
a
Choose one of the options below:
To set the paper type for the MP
Tray press Menu, 1, 1, 1.
To set the paper type for Tray#1
press Menu, 1, 1, 2.
To set the paper type for Tray#2
press Menu, 1, 1, 3 if you installed
the optional tray.
11.Paper Type
1.MP Tray
a Plain
b Thick
Select ab & OK
b
Press a or b to select Thin, Plain,
Thick, Thicker, Transparency or
Recycled Paper. Press OK.
c
Press Stop/Exit.
Note
• Transparency is not available for the
optional Tray #2.
• You can choose Transparency only if
A4, Letter, Legal or Folio size was
chosen as the paper size.

Paper Size

3
You can use nine sizes of paper for printing
copies: A4, Letter, Legal, Executive, A5, A6,
3
B5, B6 and Folio.
So that the auto tray select and auto
reduction features of your machine can work
properly, when you change the size of paper
in the tray you will also need to change the
paper size setting at the same time.
a
Choose one of the options below:
To set the paper size for the MP
Tray press Menu, 1, 2, 1.
To set the paper size for Tray#1
press Menu, 1, 2, 2.
To set the paper size for Tray#2
press Menu, 1, 2, 3 if you installed
the optional tray.
12.Paper Size
1.MP Tray
a A4
b Letter
ab
Select
b
Press a or b to select A4, Letter,
Legal, Executive, A5, A6, B5, B6,
Folio or Any.
Press OK.
c
Press Stop/Exit.
Note
• Any (size) appear only when you select
the MP tray (Menu, 1, 2, 1).
• If you select Any for the MP Tray Paper
Size: You must choose MP Only for the
Tray Use setting. You cannot use the Any
Paper Size selection for the MP tray when
making N in 1 copies. You must choose
one of the other available Paper Size
selections for the MP tray.
• A6 size is not available for the optional
Tray #2.
& OK
3
3
3
15