Cleaning And Maintenance - Dometic DM50CD Installation And Operating Manual

DM50CD, DM50CF
You can use the setting button (1) to set the cooling temperature to one of three
values: 4 °C, 7 °C and 12 °C (39 °F, 45 °F and 54 °F).
Thereby the temperature will be changed in the order 4 °C ... 7 °C ... 12 °C ... 4 °C
(39 °F ... 45 °F ... 54 °F ... 39 °F) etc.
1. Press the setting button (1) and keep it pressed for 3 s, until the lamp (2) starts to
blink.
2. Press immediately the setting button (1) again.
✔ The lamp (2) indicates the setting temperature:
– 4 °C (39 °F): the lamp flashes five times in three intervals
– 7 °C (45 °F): the lamp flashes three times in three intervals
– 12 °C (54 °F): the lamp flashes once in three intervals
I
NOTE
The minibar sets the cooling temperature automatically to 7 °C (45 °F),
when it is connected to a power source.
8

Cleaning and maintenance

!
WARNING!
Always disconnect the device from the power supply before you clean
and service it.
A
NOTICE! Risk of damage
• Never clean the cooler under running water or in dish water.
• Do not use abrasive cleaning agents or hard objects during cleaning
as these can damage the cooler.
• Do not use mechanical devices or other means to accelerate the
defrosting process, other than those recommended by the
manufacturer.
➤ Occasionally clean the device interior and exterior with a damp cloth.
EN
Cleaning and maintenance
19