Cleaning And Maintenance - Dometic HIPRO CARE A30 Short Operating Manual

EN
Overview of the models available:
Fig.  on page 1
Switching on:
Fig.  on page 2
Setting the temperature:
Fig.  on page 2
Setting the silent mode (standby) (C60SBI, C60SFS only):
Fig.  on page 3
Switching off:
Fig.  on page 3

7 Cleaning and maintenance

WARNING! Electrocution hazard
Always disconnect the device from the mains before cleaning and maintenance.
NOTICE! Damage hazard
• Do not use abrasive cleaning agents or hard objects during cleaning as these can damage the de-
vice.
• Never use hard or sharp tools to remove ice or to free frozen objects on the device.
• Do not use any mechanical tools or any other tools to speed up the defrosting process.
• The light source can only be replaced by the manufacturer, a service agent or similarly qualified per-
son to avoid hazard.
Clean the device regularly and as soon as it becomes dirty with a damp cloth.
Wipe the device dry with a cloth after cleaning.
Check the condensate drain regularly.
Clean the condensate drain when necessary. If it is blocked, the condensate collects on the bottom of the de-
vice.
For absorber versions: Use a brush or so cloth annually to remove dust from the absorber unit.
8 Disposal
WARNING! Fire hazard
• The refrigerant is highly flammable. Do not open or damage the refrigerant circuit.
• The insulation of the device contains an insulating gas (see data plate). Do not damage the insula-
tion.
Recycling packaging material: Place the packaging material in the appropriate recycling waste bins wher-
ever possible.
8
Fig. 
Fig. 
Fig. 
Fig. 
Fig. 