Installation - Dometic DM50CD Installation And Operating Manual

Installation

6 Installation
!
WARNING! Fire hazard
• Damage to the refrigerant circuit at the back of the minibar causes a
fire hazard as the cooling agent is highly flammable. To avoid a
damage to the refrigerant circuit due to instability of the minibar,
always fix the minibar in accordance with the instructions.
• When positioning the minibar, ensure the supply cord is not trapped
or damaged.
• Do not locate multiple portable socket-outlets or portable power
supplies at the rear of the minibar.
• The AC plug must remain accessible after installation to allow for
disconnection from the AC power supply.
6.1 Notes on mounting into furniture
You can mount the minibar in four ways into furniture. Choose your favored
alternative according to the following figure (page 15).
Observe the following:
• The cut-out dimensions H x W x D are:
– DM50CD: 443 x 570 x 490 mm (17.4 x 22.4 x 19.3 in.)
– DM50CF: 443 x 570 x (488 + d) mm (17.4 x 22.4 x (19.2 + d) in.)
d is the thickness of the hotel's own decor
• The clearance between the minibar's back and the furniture wall should be
10 mm (0.4 in.) or more.
• The ventilation openings for the chosen alternative have to be produced as
shown in following figure (page 15).
• Air passing through the inlet air duct must not be heated by any heat sources
(heaters, direct sunlight, gas ovens etc.).
I
NOTE
The minibar must be leveled carefully to ensure proper function.
14
DM50CD, DM50CF
EN