Table of Contents
Advertisement
Installation
7 Installation
!
CAUTION! Risk of injury
The refrigerator has sharp edges. Use gloves during installation.
A
NOTICE! Damage hazard
Do not install the refrigerator in the rear of motor homes with the door facing the direction of travel.
7.1 Preparing the installation
When installing the refrigerator, note the following:
• Ensure that the floor is solid and level.
Park the vehicle horizontally for this purpose.
• The refrigerator must be installed so that:
– The refrigerator is easily accessible for service work.
– The refrigerator is easy to uninstall and install.
– The refrigerator can be easily removed from the vehicle.
• The refrigerator must be installed in a recess so that it stands secure when the vehicle is in motion. Note the
dimensions in fig. 8.
• The refrigerator must be installed with a minimum distance of 5 mm from the floor to ensure that the door can
be opened properly (fig. 7).
– Ensure that no carpets interfere with the free movement of the door.
– Avoid placing the refrigerator directly on the floor.
• The refrigerator must not be installed to the side of the air inlet and outlet vents as this leads to poor perfor-
mance and increases the power consumption of the refrigerator.
• The air inlet and outlet vents must not be covered by vehicle parts during operation (e.g. by an open door or
by attached accessories such as bicycle racks).
• Choose a location where the refrigerator is protected from drafts, excessive heat and moisture.
7
14
RUC5(x)08X, RUC6(x)08X, RUC8(x)08X
EN
Advertisement
Table of Contents
