Getting Started; Carton Components - Brother DCP-7030 Quick Setup Manual

Getting Started

1

Carton components

1
Carton components may vary from one country to another.
Save all packing materials and the carton in case for any reason you must ship your machine.
Warning
Plastic bags are used in the packaging of your machine. To avoid danger of suffocation, please keep these
bags away from babies and children.
1 Automatic Document Feeder (ADF) (DCP-7040 only)
2 Control Panel
3 Face-down Output Tray Support
4 Manual Feed Slot
5 Paper Tray
CD-ROMs
For Windows
For Macintosh
Drum Unit Assembly
(including Starter Toner Cartridge)
The interface cable is not a standard accessory. Please purchase the appropriate interface cable for the interface
you intend to use (USB). Do NOT connect the interface cable at this time. Connecting the interface cable is done
during the software installation process.
USB interface cable
Please make sure you use a USB 2.0 interface cable that is no longer than 6 feet (2 meters). When you use a
USB cable, make sure you connect it to the USB port of your computer and not to a USB port on a keyboard
or non-powered USB hub.
Your machine has a USB interface that is compatible with the USB 2.0 specification. This interface is also
compatible with Hi-Speed USB 2.0; however, the maximum data transfer rate will be 12 Mbits/s. The machine
can also be connected to a computer that has a USB 1.1 interface.
2
1
2
3
4
5
®
®
Quick Setup Guide
AC Power Cord
9
8
7
6
6 Front Cover
7 Power Switch
8 ADF Document Output Support Flap (DCP-7040 only)
9 Document Cover
User's Guide