®
How to scan using Windows
Scanning a document using WIA driver
(For Windows
WIA compliant
®
Windows
XP uses Windows
images directly into the PaperPort
images directly into any other software application that supports WIA or TWAIN scanning.
How to access the scanner
1
Open your software application to scan the document.
Note
The instructions for scanning in this Guide are for when you use ScanSoft
scanning from another application may vary.
2
Select Scan from the File drop-down menu or select the Scan button.
The Scan panel appears on the left of the screen.
3
Select WIA-Brother MFC-XXXX or WIA-Brother DCP-XXXX from the Scanner drop-down list box.
Note
■
If the machine is connected via:
Parallel-use WIA-Brother MFC-XXXX or WIA-Brother DCP-XXXX
USB-use WIA-Brother MFC-XXXX USB or WIA-Brother DCP-XXXX USB
LAN-use WIA-Brother MFC-XXXX LAN or WIA-Brother DCP-XXXX LAN
(Where XXXX is your model name.)
■
If you choose TW-Brother XXXXXXX, the TWAIN driver will run.
4
Click Scan.
The Scan dialog box will appear:
®
XP only)
®
Image Acquisition (WIA) for scanning images from the machine. You can scan
®
9.0SE viewer that Brother included with your machine or you can scan
®
®
PaperPort
9.0SE. The steps for
2
2 - 2