Scan; Image (Example: Microsoft Paint) - Brother DCP-7010L Software User's Manual

®
Using ControlCenter2.0 (For Windows )

SCAN

This section contains four buttons for Scan to Image, Scan
to OCR, Scan to E-mail and Scan to File applications.
These four selections can be accessed from 3
ControlCenter2.0 or from the Scan key on the control panel of
the machine. The target application, file type and scan
settings are configured independently by choosing the
Software Button or the Device Button tabs of
ControlCenter2.0 configuration window.

Image (example: Microsoft Paint)

Scan to Image feature allows you to scan an image directly
into your graphics application for image editing. To change
the default settings, right-click on the button and select
Software Button or Device Button.
To change the destination application, select the appropriate
application from the Target Application pull down list. You
can add an application to the list by clicking the Add button.
Enter the Application Name (up to 30 characters) and the
Application Location. You can also find the application
location by clicking button. Choose the File Type from
the pull-down list.
You can delete applications that you have added by selecting
the Application Name and click the Delete button.
To change the file type or Scan settings make your selections
from the appropriate pull down list.
Note
This function is also available for Scan to E-mail and Scan to
OCR. The window may vary depending upon the function.
3 - 4