Brother DCP-7010L Software User's Manual page 75

Network Scanning (For Windows
2
Click the Network Setting tab in the dialog box and
select a method to specify the machine as a Network
scanner for your PC.
Specify your machine by address
Enter the IP address of the machine in the IP Address field.
Click Apply and then OK.
Specify your machine by Name
Enter the machine Node name in the Node Name field.
Click Apply and then OK.
Search for Devices
Click Browse and select the appropriate device you want to
use.
Click OK.
Click Apply and then OK.
3
Click the Scan To Button tab in the dialog box and enter
your PC name in the Display Name field. The machine's
LCD displays the name you enter. The default setting is
your PC name. You can enter any name that you like.
Note
The settings in this window have no relevance when being
used with the optional wireless print/scan server NC-2200w.
If you followed the installation steps in the Quick Setup Guide,
then the scanning destination settings have already been
configured. If you need to change the settings, see the
NC-2200w Network User's Guide for details.
4
You can avoid receiving unwanted documents by setting a 4-digit Pin number. Enter your Pin number in
the Pin number and Retype Pin number field. To send data to a PC protected by a Pin number, the
LCD prompts to enter the Pin number before the document can be scanned and sent to the machine.
(See Using the Scan key on page 6-3 to 6-6.)
®
)
6
6 - 2