Setup Misc; Ethernet - Brother DCP-315CN Network User's Manual

Setup Misc.

Ethernet

Ethernet link mode. Auto allows the print server to operate in
100BaseTX full or half duplex, or in 10BaseT full or half duplex mode
by auto negotiation.
100BaseTX Full Duplex (100B-FD) or Half Duplex (100B-HD) and
10BaseT Full Duplex (10B-FD) or Half Duplex (10B-HD) fix the print
server link mode. This change is valid after the print server has been
reset (default is Auto).
If you incorrectly set this value, you may not be able to
communicate with your print server.
(For MFC-425CN)
1 Menu/Set
Press
▲
2
Press or
10B-FD/10B-HD.
3 Menu/Set
Press
4 Stop/Exit
Press
3 - 16 FRONT PANEL SETUP
5 2 1
, , , .
▼
to select Auto/100B-FD/100B-HD/
.
.