Tcp/Ip Printing; Installing The Brother Peer To Peer Software - Brother DCP-315CN Network User's Manual

TCP/IP Printing

Brother's Peer to Peer printing software requires the TCP/IP protocol
to be installed on your Windows
Address has to be defined for the Print/Scan server. Refer to your
®
Windows documentation for more information on how to configure
the TCP/IP protocol on your Windows
If you haven't already done so, configure the IP address of the
machine, for more information, See Assigning TCP/IP Information
Automatically (Advanced) on page 2-4.

Installing the Brother Peer to Peer Software

If you already installed the driver from the printer's CD-ROM
Installer and you selected "Brother Peer-to-Peer Network
Printer" during the installation then you do not need to install
the Brother Network Print Software again.
1
Start the CD-ROM installation menu program according to the
Quick Setup Guide.
2
Select the the model name and your language (if necessary),
and the click Install Install Optional Applications.
3
Click Network Print Software.
4
Push the Next button in response to the Welcome message.
5
Select the desired directory to install the Brother Peer to Peer
Print (LPR) files and push Next. The installation program will
create the directory for you if it does not already exist on your
disk.
6
Enter the Port name that you wish to use and click OK. The
default port name is BLP1. Whichever name you choose, it must
be unique and it MUST begin with BLP.
NETWORK PRINTING FROM WINDOWS
®
peer-to-peer computers and an IP
®
PC.
®
(Peer to Peer) 4 - 5