Gateway - Brother DCP-315CN Network User's Manual

Gateway

This field displays the current gateway or router address used by the
machine. If you are not using DHCP or BOOTP to obtain the gateway
or router address, enter the address you wish to assign. If you do not
have a gateway or router, leave this field blank. Check with your
network manager if you are unsure.
(For MFC-425CN)
1 Menu/Set
Press
2 1
Select to change. Enter the Gateway address.
3 Menu/Set
Press
4 Stop/Exit
Press
(For DCP-315CN)
1 Menu
Press
▲
2
Press or
Set
Press .
▲
3
Press or
Set
Press .
▲
4
Press or
Set
Press .
▲
5
Press or
Set
Press .
▲
6
Press repeatedly to enter the first three-digit number for the
Gateway address.
Set
Press .
Repeat this step until you have entered the fourth three-digit
number to complete the Gateway address.
Each number can also be increased or decreased by holding
▲
down or
7 Stop/Exit
Press
3 - 8 FRONT PANEL SETUP
5 1 4
, , , .
.
.
.
▼
to select 3.LAN.
▼ to select 1.Setup TCP/IP.
▼
to select 4.Gateway.
▼
1
to select to change.
▼
.
.