Riello Burners FS10 Installation, Use And Maintenance Instructions page 32

WARNINGS TO AVOID BURNOUT OR BAD COMBUSTION OF
1 – When the burner is stopped, the smoke pipe must be opened and effect a natural
draught in the combustion chamber. If the smoke pipe is closed, the burner must
be drawn back till the extraction of blast tube from the furnace. Before operating in
this way take the voltage off.
2
– The place, where the burner works, must have same openings suitable for the passage
of air necessary for combustion. To be sure about this, you have to control CO 2
and CO in the exhaust gases with all the windows and doors closed.
3 – If in the place, where the burner works, there are air-breathings, check the existence
of air-input openings with dimensions suitable for the necessary air-exchange. In
any case check that, when the burner is stopped, the air-breathings do not draw
warm smokes from pipes through the burner.
2445
THE BURNER
10 GB