Culligan Aquasential Cullar Owner's Manual page 17

Standard Manual Reconditioning
Screen Display
Filtering
JAN-01-18 12:01P
1)INFORMATION
>2)REGEN/BYPASS
REGEN/BYPASS
>REGEN NOW
MANUAL BYPASS
>OFF
1)INFORMATION
>2)REGEN/BYPASS
Culligan Connect
The Culligan Connect™ interface is an intuitive mobile app and is available on both iOS and Android� Users will see
their daily and weekly usage patterns graphically represented and instantly updated each time they open the app�
In addition, alerts and the ability to put the unit in bypass mode or a reconditioning cycle from any location provides
an all new level of control and convenience�
17
01040707 B 07/21
Range
1� This is the HOME SCREEN� Press any button except
N/A
to advance to the MAIN MENU SCREEN�
2� Press
1–6
screen displays the Regen/Bypass settings�
3� Press
Regen Off
4� The default is REGEN NOW� Press the
Regen
option to begin reconditioning cycle immediately�
Now
5� If the screen displays REGEN OFF then the filter will not
Regen
initiate a reconditioning cycle��
Tonite
6� If the screen displays REGEN TONITE then the filter will
Bypass
initiate a reconditioning cycle that night at 2:00 a�m� (or at
the preset reconditioning time)� The screen displays two
status messages: FILTERING and REGEN TONITE.
If the screen displays BYPASS then for a specified time
7�
the filter will be bypassed� Press
time the filter is to be in the bypass state�
8� Press
Off
is to be in the bypass state�
30 (min)
60
9� Press
90
Manual Mode menu�
120
180
Manual
Bypass
10� Press
and saves the settings�
TM
Changing the Setting
to 2)REGEN/BYPASS then press
and or to change the setting�
to select the total
and or to select the total time the filter
to accept this setting� The screen displays the
until the screen displays the HOME SCREEN
� The
to select this