Culligan Aquasential Cullar Owner's Manual page 24

Culligan Aquasential Smart High Efficiency 9" Filter Empty, 10" Filter Empty, 9" Filter
Empty Outdoor, and 10" Filter Empty Outdoor Water Filter
Culligan knows the more informed you are about your water treatment systems, the more confident you will be about its performance� It's because
of this and more than seventy years of commitment to customer satisfaction that Culligan is providing this Performance Data Sheet to its customers�
NOTE!
Read this Performance Data Sheet and compare the capabilities of this unit with your actual water treatment needs.
It is recommended that before purchasing a water treatment unit, you have your water supply tested to determine
your actual water treatment needs.
Manufacturer: Culligan International Company
9399 W� Higgins Rd�, Suite 1100
Rosemont, IL 60018 USA
(847) 430-2800
www�culligan�com
Product: Culligan Aquasential Smart High Efficiency 9" Filter Empty, 10" Filter Empty , 9" Filter Empty Outdoor, and 10" Filter
Empty Outdoor Water Filter
Testing Conditions & Results:
Pressure: 60 psi
Service Flow Rate: 4�0 gpm @ 2�0 psi for 9" filters
5�9 gpm @ 3�0 psi for 10" filters
Operating Conditions:
Operating Temp� Range:
Electrical Characteristics: 24 VDC, 21�6 Watts
The Culligan Aquasential Smart High Efficiency Empty Water filters
have been tested and certified by WQA against NSF/ANSI Standard
372, CSA B483�1, and NSF/ANSI/CAN Standard 61 for material safety
requirement only� Not certified for contaminant reductions by WQA� No
media or underbedding has been qualified with these systems�
Performance Indicator: If water flow decreases or a noticeable taste change occurs a reconditioning cycle should be initiated� If conditions do
not improve, contact your local Culligan dealer� They can determine if your filter requires servicing� Do not use with water that is microbiologically
unsafe or of unknown quality without adequate disinfection before or after the system� Refer to the Specifications, Familiarization and Warranty
section of this Owner's Guide (P/N 01040707) for more specific product information� To avoid contamination from improper handling and
installation, your system should only be installed and serviced by your Culligan dealer� Performance will vary based on local water conditions�
The substances reduced by this system are not necessarily in your water�
Buyer Signature _______________________________________________________________________ Date ____________________
Seller Signature _______________________________________________________________________ Date ____________________
24
01040707 B 07/21
33 - 120°F (1 - 50°C)
Temperature: 63 - 73° F (17 - 23° C)
pH: 4�9 - 5�5
Water Press� Range:
Water Press� Range (Canada):
20 - 120 psi (140 - 830 kPa)
20 - 90 psi (140 - 620 kPa)