Table of Contents
Advertisement
During charging the front LED is on. When the LED is flashing, or at maximum 4
hours time, disconnect the charger.
Batteries can also be charged connecting the optional cable to the car cigar-lighter.
It is a good practice to disconnect the charger, after charge finisched
ATTENTION: use only the original line power supply.
4. MAINTENANCE
4.1 GENERAL RACCOMENDATIONS
The equipment needs neither special servicing or calibration.
For a correct maintenance, is recommended:
-
after use, clean the patient cables and the electrodes removing the gel
residue
-
do not use aggressive chemical detergents, or vapour.
-
clean the unit with dry cotton.
-
the device cannot be sterilized. The electrodes can be sterilized with oxide
of ethylene.
-
do not rule the screen.
-
do not spill liquid into the unit.
-
do not pull the patient cables.
4.2 PERIODIC CONTROLS
Periodically control the battery status bar. When the charge value is lower than
80%, please plug in the charger.
IMPORTANT
To insure a correct and long-lasting operation of the batteries it is necessary to
control the charge status. If the device is not used, it is suggested to recharge
the batteries every 2 weeks.
5. STANDARD ACCESSORIES
1101 Carrying case (optional)
1102 Consolle EPG View
1103 Patient Cable
1104 Electrodes Set
1105 Power Cable
1106 Paper roll
1107 Gel Flacon
1108 User Manual
PROGETTI S.r.l. - Via B. Buozzi, 28 10024 Moncalieri (To) Italy – www.progettimedical.com - info@progettimedical.com
EPG View USER MANUAL V. 03-10 Pag. 10
Hide quick links:
Advertisement
Table of Contents
