Loading The Thermal Paper - Progetti EPG View/Par. C./ Int. User Manual

1-3 channels electrocardiograph with graphical display and printer
Table of Contents

Advertisement

3.11 PRINTING TRACES
1. Manual mode, in real time: at any time, pressing the
2. Isochronous mode (suggested): pushing the key
printed and in the same time the other leads are acquired and printed in sequence for 5
or 10 seconds according to the frame length set-up.
Basic model
After first group print, the message "DATA FROM MEMORY" will be displayed. It
is also possible to modify the parameters (paper speed, sensitivity of recording .....)
and to reprint the traces in memory pushing the key "Copy"
press again the same key.
Parameter calculation/ Interpretation model
After traces hard copy, the table with parameter calculation will be printed (for Par.
C. model) and then the interpretation (for Int. model). After machine, automaticaly,
returns to normal operation.
3. Sequential Mode: pushing the key

3.13 LOADING THE THERMAL PAPER

When the thermal paper is finished, the "paper missing" message appears on the
display. Cut the paper straight and insert it into the printer inlet window with the
thermosensible side down. The printer will feed it automatically.
Keep pushing the feed key until the paper comes out of the printer straight.
The paper used – of high quality – can be diagrammed or white; in this case it is
necessary to program the electrocardiograph for the Grid Print (v. Secondary
operational modes).
3.14 BATTERIES CHARGE
At the first utilisation the batteries must be charged. During the first charge, it is
suggested to turn off the instrument.
Connect the line power supply to the charge connector placed on the back side, near
the main switch.
When the "Battery Low" message appears on the display it is necessary to recharge
the batteries.
PROGETTI S.r.l. - Via B. Buozzi, 28 10024 Moncalieri (To) Italy – www.progettimedical.com - info@progettimedical.com
the print push again the same key.
,
acquired and printed in automatic sequence. The print can be
stopped pressing the key
EPG View USER MANUAL V. 03-10 Pag. 9
"Manual key. To stop
the first leads group will be
all the electrocardiograph leads are
at any time.
.
To exit this mode

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents