Progetti EPG View/Par. C./ Int. User Manual page 6

3.5 DEFAULT OPERATIONAL SET-UP
At power on the default set-up is:
 Traces display/print number: 3
 Traces Order: Standard
 Paper Speed: 25 mm/s
 Sensitivity of recording: 5 mm/mV
 Filters: Disabled
 Traces Group: I; II; III
 Hardcopy frame length: 5 seconds
3.6 THE MAIN OPERATIONAL MODES
1. Paper Speed: 25mm/s at power on. Pushing the key  it is possible to
select the paper speed: 50mm/s, 5mm/s, 10mm/s, 25mm/s...... 5mm/s ........
2. Sensitivity of recording: 5mm/mV by default. Pushing the key it is
possible
20mm/mV..........5mm/mV..........
3. Filters: disabled by default. Pushing the key
desired filter, according to the keys F
- LP: anti muscle tremors filter
- HP: anti base line disturbs filter
- NOTCH: anti power line disturbs filter
4. Traces Group: the Standard modality is predefined at power on. With this
modality, on the display will show:
- First Group: I; II; III
- Second Group: aVr; aVL; aVF
- Third Group: V
Fourth Group: V
-
It is possible select the desired group pushing the keys
Changing to Cabrera modality, the display will show:
- First Group: aVL; I; -aVR
- Second Group: II; aVF; III
- Third Group: V
- Fourth Group: V
PROGETTI S.r.l. - Via B. Buozzi, 28 10024 Moncalieri (To) Italy – www.progettimedical.com - info@progettimedical.com
to select the
; V ; V
1 2
; V ; V
4 5
; V ; V
1 2 3
; V ; V
4 5 6
EPG View USER MANUAL V. 03-10 Pag. 6
sensitivity of the
≈
it is possible to enable the
; F ; F
1 2 3:
3
6
trace: 10mm/mV,
 
and .